Our Powders. Your Products.

THERMAL SPRAY POWDER

Thermal Spray Powder 1 (3)

Buffalo Tungsten produces high quality tungsten carbide thermal spray powders. Our agglomerated, sintered materials provide dense, hard surface coatings with excellent wear properties at low temperatures (<500 C). They are normally applied with a plasma high velocity oxygen fuel (HVOF) spray gun. Alternate compositions are used to achieve properties necessary for various applications. A common powder is 88% tungsten carbide and 12% cobalt, which is sometimes referred to as 88-12 or 88WC 12Co. Nickel and chromium are also used in standard powders, with additional compositions available upon request. Tungsten carbide based thermal spray coatings are frequently used to replace plating techniques as a surface treatment. They are used to restore wear surfaces and extend the service life of parts before they need replacement. Buffalo Tungsten's thermal spray powders have been used in a wide range of industries, helping Buffalo Tungsten establish a strong position in the market as a manufacturer of tungsten carbide thermal spray powders.

WCT 74/20/6 powders provide superior oxidation, corrosion and chemical resistance up to 750 C

WCT 90WC/10Ni powders provide better corrosion properties and deposition efficiency than WC/Co powders

 

WCT 88/12

88/12 thermal spray powder provides a dense, hard surface coating with excellent wear properties.

Applications: Surface Coating

Thermal Spray Powder

WCT 88/12VF

Our 88/12VF thermal spray powder has different physical characteristics than our standard 88/12 powder.

Applications: Surface Coating

Thermal Spray Powder

WCT 86/10/4

This powder is approximately 10% cobalt and 4% chromium.

Applications: Surface Coating

Thermal Spray Powder

WCT 83/17

This material has a higher cobalt content than our 88/12 powders.

Applications: Surface Coating

Thermal Spray Powder

WCT 74/20/6

This thermal spray powder is primarily tungsten carbide and chromium with a small amount of nickel.

Applications: Surface Coating

Thermal Spray Powder

WCT 90WC/10Ni

This powder is a blend of tungsten carbide and nickel.

Applications: Surface Coating

Thermal Spray Powder