BTIbanner2006
Home
Tungsten Powder
Tungsten Carbide
Co-Reduced
Crushed WC
Thermal Spray
Tungsten Rod
Moly Rod
HomeProduct CatalogThermal Spray > WCT 10Ni

WCT-10Ni Thermal Spray Powder

WCT 90WC/10Ni Series

 

WC/Ni powders manufactured by BTI are an agglomerated and sintered material, which provides good wear properties at low temperatures (<500 C) and better corrosion properties than the WC/Co powders.  These WC/Ni powders also have a better deposition efficiency than the WC/Co powders as well.

The base tungsten carbide (WC) powder used to produce this material is typically a 2-5 microns APS conventional carbide powder, but micrograin (0.2-0.3 microns APS) carbide powder can also be used in whole or in part.

 

 

 

 

WCT-10Ni (conventional WC)

WCTN-10Ni (micrograin WC)

 

DESCRIPTION

Agglomerated & Sintered

 

CHEMICAL

Ni = 9 –11%

C = 5.2 – 5.6%

W = Balance

 

SIZE

-53 +20 micron

-45 +15 micron

-30+5 micron

APPARENT DENSITY

4.0 g/cc minimum

 

 

Analytical Reports
A Certificate of Analysis (COA) accompanies each shipment.
Copyright © 2011 Buffalo Tungsten Inc.