BTIbanner2006
Home
Tungsten Powder
Tungsten Carbide
Co-Reduced
Crushed WC
Thermal Spray
Tungsten Rod
Moly Rod
HomeProduct CatalogThermal Spray > WCT 10Co4Cr

WCT-10Co4Cr Thermal Spray Powder

WCT 86/10/4 Series

 

Thermal Spray WC/Co powders manufactured by BTI are an agglomerated and sintered material, which provide a dense, hard coating with excellent wear properties at low temperature.

The base tungsten carbide (WC) powder used to produce this material is typically a 2-5 microns APS conventional carbide powder, but micrograin (0.2-0.3 microns APS) carbide powder can also be used in whole or in part.

 

 

 

WCT-10Co4Cr (conventional WC)

WCTN-10Co4Cr (micrograin WC)

 

DESCRIPTION

Agglomerated & Sintered

 

CHEMICAL

Co = 9 –11%

Cr = 3.5 - 4.5%

C = 5.0 – 5.4%

W = Balance

 

AVAILABLE SIZES

-53 +20 micron

-45 +15 micron

-30+5 micron

APPARENT DENSITY

 4.3 g/cc minimum

 

 

 

Analytical Reports
A Certificate of Analysis (COA) accompanies each shipment.
Copyright © 2011 Buffalo Tungsten Inc.